Strengthen Your Roof with Trusses

After hurricanes ravaged Florida in recent years, building codes were strengthened to keep future damage to a minimum. Officials and builders have learned that keeping the lid on a house means forming a tight bond between the sail-like roof deck and the walls below. That job falls to the engineered roof truss system that holds it all together.

Trusses Surpass Traditional Framing
Carpenters used to use two-by lumber to frame into stringers and rafters. Engineers and architects now design roof trusses built of 2x4s in triangular configurations that are joined together with metal connector plates. The result is a cohesive roof truss that stands up to state, local, and national building codes. Trusses perform to such a high degree because the lumber is uniform in size, density, and quality, and metal connector plates ensure rigidity at joints.

Engineered trusses have been on the building scene for 35 years, a track record that impresses many builders and homeowners. Kirk Grundahl, executive director of theWood Truss Council of America(WTCA), in Madison, WI, says homeowners can be assured their roof trusses are engineered to exacting design standards nationwide since manufacturers must meet the standards set by WTCA and the Truss Plate Institute (TPI).

Sean O’Connor of Robbins Engineering, in Tampa, FL — designers, plate fabricators, and truss system engineers — explains that roof trusses create a stronger roof structure because they are engineered using CAD (computer-aided design) design techniques and computer analysis for worst-case scenarios.

“Because every one of the roof trusses are engineered, it literally takes into consideration all the forces acting on the truss, from gravity loads to wind loads, seismic loads, and uplift loads,” O’Connor says.

Roof Trusses Allow Open Floor Plans
Trusses have many pluses, including their overall strength, ability to be placed quickly, and span capability. Since they’re built from shorter lengths of lumber, roof truss systems are typically less expensive to build than roofs with conventional framing.

桁架设计成比常规框架屋顶更大的距离。由于它们从屋顶传递到外壁，因此没有内壁需要承载。这个opens up interior spaceand allows for many interior design options.

Wood, Steel, and Engineered Timbers
Roof trusses, historically composed of wood with metal connector plates, now have competition. As steel-framed homes catch on, so have all-steel roof trusses. O’Connor says that to date steel roof trusses are typically reserved for the light commercial and industrial markets, with wooden trusses still dominating home construction.

Engineered wood products such as I-joists have also made a big surge in the market. “They can be used almost like framing lumber, but unlike conventional lumber, they’ll span up to 60 feet in length,” O’Connor says.

Wood roof trusses with metal connectors can also be treated with fire retardant and have an “excellent fire rating,” according to O’Connor, “and from a budgetary and quality standpoint, are the price point winners.” When they are properly engineered and put together, the wood roof truss with low-cost connector plates will perform to engineered lumber parameters. “So they are a nice, low-cost solution to framing problems,” O’Connor says.

Coupled with hurricane straps for fastening the trusses to the walls, the roof system is typically better than any stick-built roof, according to O’Connor.