- 眼睛protection
- Work gloves
- 玻璃切割机
- 木匠广场
- 摩擦石
- 瓷砖钳子
- 请参阅完整列表«
- 瓷砖切割机
- 湿锯
如何：切割陶瓷瓷砖
Ceramic tile affords a durable, attractive surface for floors and walls alike. If there's a ceramic tile job in your future, ensure quality results by first learning what tools you'll need and how best to use them to make a variety of cuts in tile.
Photo: fotosearch.com
一个中小型的陶瓷瓷砖工作是一个很好的项目，该项目很好地掌握了大多数Diyers。通过仔细测量，正确的工具以及对细节的认真关注，确定的房主可以取得令人满意的结果。但是正确做事可能很耗时。例子：甚至最多直接的瓷砖工作无论是完成表面边缘还是在障碍物上工作，都需要切几块瓷砖。切割瓷砖是一项需要准确测量和精确使用工具的任务。为了确保您的项目顺利进行，最好提前弄清楚如何处理所有这些削减。
Different jobs require different types of cuts. For some, you’ll be able to get by with just straight cuts; for others, you may need to cut on the diagonal or carve a corner or curve out of a tile. And each type of cut entails different methods and tools. As you lay out your tile design, determine what kinds of cuts you’ll need, then check below for the situation that best describes your job to find out how to proceed.
Photo: fotosearch.com
在你开始之前
Whatever cuts you’re making, the general process is the same: Measure and mark the tile on the top (glazed) side, snap or cut it, then smooth the edges. If you’re doing a one-time job that will require a tile cutter or wet saw, you may want to rent instead of buy; these tools are available for rental from home improvement stores. If you have never used any of these tools before, it’s a good idea to practice a little on some备用瓷砖before you get started in earnest.
请注意，以下部门只是一般准则：对于某些瓷砖，您可能需要使用工具和技术的组合。最重要的是，在启动任何涉及切割瓷砖的项目之前，戴上眼睛保护和手套！
广告
剪裁的小型工作
If you need to cut just a few tiles and you don’t need to make any curved or corner cuts, you can probably make do with a carpenter’s square and a glass cutter. The latter tool costs little and can be found in craft stores and home stores, as well as online. You can在亚马逊上接一个不到$ 10。
STEP 1: Measure and mark the tile.
测量，然后使用铅笔标记要切割的瓷砖。
步骤2：评分瓷砖。
将瓷砖放在平坦的表面上，例如工作台或一块胶合板。将您的正方形稍微从标记的线处略微，以便玻璃切割机（或钳子上的得分轮）将撞到正确的位置。然后，从瓷砖的边缘开始，将评分工具放在线上，然后将其拖动到瓷砖上时牢固地向下按下。您应该听到刮擦噪音，这是瓷砖正在评分的标志。
步骤3：捕捉瓷砖。
If you’re using pliers, open them and slide the tile all the way into them, with the scoring wheel sitting directly under the line you’ve scored on top of the tile. Squeeze the pliers while gently supporting the tile as it snaps. If you’re used a glass cutter, place a length of wire hanger or other appropriately sized material beneath the scored line, then push down on either side of the tile to snap it; alternatively, grab the tile nippers and snip off the scored piece.
STEP 4: Smooth the edges of the tile.
如果瓷砖的切割边缘粗糙，请用摩擦石将其平滑。
Photo: fotosearch.com
直接削减的更大工作
If you have lots of tiles to cut, or if you need to make cuts from corner to corner, use a tile cutter. Whether you plan to invest in the purchase or rent one to save a few bucks, just make sure you pick up a tile cutter that’s big enough for the tile you’re cutting! Then, as mentioned above, practice on a few spare tiles until you’re comfortable with this tiling tool.
广告
STEP 1: Measure and mark the tile.
首先，测量并标记要切割的瓷砖。
步骤2：评分瓷砖。
将瓷砖放入瓷砖切割机中。确保将瓷砖紧贴在围栏上，并直接在得分轮下方。在手柄上施加轻微的压力时，将车轮向前滑过瓷砖。您应该听到刮擦噪音，这是瓷砖正在评分的标志。
步骤3：捕捉瓷砖。
一旦得分瓷砖，请将手柄从瓷砖的边缘稍微向后移动，然后让脚平放在瓷砖顶部。在手柄上施加向下压力，瓷砖会捕捉。
STEP 4: Smooth the edges of the tile.
如果瓷砖的切割边缘粗糙，请用摩擦石将其平滑。
照片：Amazon.com
Corner Cuts and Really Big Jobs
如果您要削减大量瓷砖来做得很大，或者您需要在门jamb或墙壁上进行角落切割，请投资于当地的家庭中心的湿锯或租用。（我建议您租用，除非您设想将来做许多类似的项目。）与任何电动工具一样，请在开始之前仔细阅读说明，并注意推荐的安全预防措施。在加入项目之前，进行一些练习裁减也是并不是不错的。
STEP 1: Measure and mark the tile.
首先，测量并标记要切割的瓷砖。
STEP 2: Cut the tile with a wet saw.
遵循所有制造商的湿锯说明，并确保您在浴缸中放了足够的水。打开湿锯，确认水在刀片上流过，然后按照将木头切在桌子锯上的方式进行切割。
广告
步骤3：平滑瓷砖的边缘。
如果瓷砖的切割边缘粗糙，请用摩擦石将其平滑。
Photo: fotosearch.com
在瓷砖上进行弯曲的切割
To make curved cuts, or to remove small pieces of tile, use tile nippers (view an example on Amazon）。有耐心，因为您可以成功地将瓷砖切成薄片。
STEP 1: Measure and mark the tile.
首先，测量并标记要切割的瓷砖。
步骤2：夹紧瓷砖。
Starting at the edge of the tile, place the tile into the tile nippers and squeeze, removing just a small amount of tile. In this fashion, continue to work your way toward your marked line, taking off only a little bit of tile at a time. If you try to remove too much at once, you will end up cracking the tile. As you get closer to your marked line, take smaller and smaller nips.
步骤3：平滑瓷砖的边缘。
咬砖的切口边缘将很粗糙，因此请确保用摩擦石将其弄平。
