Pre-cast Concrete Foundation Installation

Project: Modular Mountain Retreat, Episode 2, Part1



来自优质墙壁的船员正在为预铸造的基础墙准备,这将为模块化家庭提供基座。

要了解铸造前面板的制造过程,鲍勃将返回Scranton PA中的单纯氧化物植物,在那里他看到了每个模块如何构成框架并准备交付。

回到伯克希尔,一旦面板通过起重机降低到位,来自上墙的Mel Zimmerman解释了基础组装过程。
Part 1: Pre-cast Concrete Foundation Installation
鲍勃学习预铸造板是由高强度混凝土的外壳墙壁与钢筋钢筋混凝土支柱组成。

The ten-inch thick pillars look similar to a traditional stud wall with Styrofoam insulation. Pressure-treated furring strips attached to the pillars make drywall or paneling easy to attach. The panels have an R factor of 5. ("R factor" is the measure of a materials resistance to the passage of heat. A concrete block has an R factor of about 2).

Polyurethane caulk with special concrete adhesives is added between each panel to ensure a tight seal. The panels are attached to each other and the base with pre-installed saddle bolts.

A typical home's installation takes about five hours and, without having to wait for the foundation to set or dry, contractors can begin framing immediately. The walls are guaranteed for 15 years compared to poured-concrete walls, which generally have a warranty of one year.
Part 2: Modular Home Construction Basics
第3部分:预先铸造基础系统的优点
在新英格兰的一些最美丽的乡村的令人叹为观止的令人叹为观止的景色,这艺术和工艺品风格平房肯定没有看起来肯定没有。你永远不会知道它是一个模块化的家,除非鲍勃带你去宾夕法尼亚州的建造,几乎从开始完成。

The house goes down the assembly line from framing, through wiring and plumbing, all the way to the installation of flooring and priming for paint.

The house is trucked to its pre-fabricated foundations on the lot, and start all the finishing touches that will prove that a modular house doesn't have to be a cookie-cutter affair.

ALL EPISODES IN MODULAR MOUNTAIN RETREAT

最受欢迎的剪辑

OUTDOOR PROJECTS

HOUSE & GARDEN TOURS